The SlimVive Diode Lipolysis system uses 1060 nm because this wavelength is highly absorbed by fat cells, allowing it to heat and damage them without harming the skin or surrounding tissue. At 1060 nm, the energy penetrates to the ideal depth for targeting subcutaneous fat, raising the temperature enough to trigger fat cell destruction. Over the following weeks, the body naturally removes these damaged fat cells, leading to a slimmer, more contoured appearance.

The NeoVive CO₂ laser uses a sealed RF tube, which is more durable, energy-efficient, and long-lasting than traditional glass tubes. This means consistent, powerful treatments with less maintenance for reliable results every time.

IPL Stands for Intensed Pulsed Light

The PulseVive utilizes xenon bulbs because they produce bright, broad-spectrum light in short pulses, allowing the treatment to target different skin concerns safely. This light can reduce pigmentation, sunspots, redness, and broken blood vessels, while also gently stimulating collagen for smoother, healthier-looking skin.

The SmoothPulse diode laser uses 755 nm, 810 nm, and 1064 nm wavelengths to target hair at different depths. The 755 nm works best for fine hair and lighter skin, 810 nm is effective for most hair and skin types, and 1064 nm is safest for darker skin tones. This combination makes hair removal safe, effective, and suitable for everyone.

Permanent hair reduction with the SmoothPulse diode laser typically requires 4-6 sessions, spaced several weeks apart depending on the treatment area and hair growth cycle. Some patients may need additional touch-up sessions to maintain long-term results, as hair growth can vary by individual.

At maximum cooling, the ChillVive can deliver air as cold as -25 °C, providing powerful, consistent cooling for optimal patient comfort during treatments.

After your laser treatment, avoid strong skincare products like retinoids, chemical peels, exfoliating scrubs, benzoyl peroxide, and harsh bleaching creams. Also, skip fragranced or alcohol-based products. Stick to gentle, soothing, and hydrating skincare until your skin heals.

Picosecond lasers work incredibly fast—so fast that they break pigment or tattoo ink into tiny particles your body can remove more easily. A shorter pulse, like 350 ps, delivers energy even more precisely than a 750 ps pulse, which means faster fading, fewer treatments, and less heat on surrounding skin. This makes the procedure safer, more effective, and gentler on your skin, while also helping improve texture and firmness.

The 585 nm and 650 nm wavelengths in nanosecond lasers target specific tattoo inks and pigmented spots. The 585 nm wavelength works best on sky blue color varieties, while the 650 nm wavelength is effective on green variety inks. The laser breaks the pigment into tiny particles, which the body naturally removes, helping fade tattoos or dark spots safely and effectively.

After your laser treatment, it’s important to take care of your skin. Avoid direct sun and tanning, skip harsh skincare products like peels or retinoids, and don’t scratch or pick at your skin. Also, stay away from hot showers, saunas, and intense exercise for a few days. Following these steps helps your skin heal properly and gives the best results.

The 10600 nm CO₂ laser is designed to target water in the skin, allowing it to remove damaged layers safely and precisely. This makes it ideal for improving wrinkles, scars, and uneven texture while also stimulating collagen for smoother, firmer skin.

The 1927 nm and 1550 nm wavelengths work together to improve the skin at different levels. The 1927 nm targets surface concerns like pigmentation and sun spots, while the 1550 nm penetrates deeper to boost collagen, tighten skin, and improve texture. This combination helps achieve smoother, more even, and youthful-looking skin.

Topical numbing cream is optional and used only for patient comfort. Most laser aesthetic treatments are well-tolerated without it, and general anesthesia is rarely necessary.

Switching handpieces is quick and straightforward: simply power off the device, unplug the current handpiece, align the connector of the new handpiece, and plug it in. Now, when the device is powered back on, the new handpiece will automatically be detected and displayed.

Yes, our device features a user-friendly preset program in the interface for simplified treatment. The practitioner simply selects the indication, skin type, and treatment intensity, and the system automatically populates the optimal settings.

The difference between a 50 mm and 100 mm CO₂ handpiece comes down to precision versus coverage. The 50 mm handpiece has a smaller spot size at 120μm, making it ideal for delicate areas, fine lines, and small scars, but it covers less area per pass. The 100 mm handpiece has a larger spot size at 240μm, allowing faster treatment of bigger areas like the full face or body, though it is less precise for small or sensitive zones.

In photothermal effects, the laser energy is absorbed by the target (like pigment, blood, or water) and converted into heat, which destroys the target gradually while affecting surrounding tissue minimally. In photoacoustic effects, ultra-short laser pulses generate a mechanical shockwave that breaks apart the target without relying on heat, making it ideal for precise pigment or tattoo removal with minimal thermal damage. Essentially, photothermal uses heat, while photoacoustic uses pressure/wave energy.

A DOE (Diffractive Optical Element) and MLA (Micro-Lens Array) are two different optics used to split laser energy into multiple micro-spots. A DOE creates a highly uniform, evenly distributed grid of micro-beams with consistent spacing and energy, making treatments more controlled and predictable. An MLA uses many tiny lenses to split the beam, but can produce less uniform patterns with slight variations in spot intensity. In short, DOEs offer greater precision and consistency, while MLAs are simpler but less accurate.

LIOB, or Laser-Induced Optical Breakdown, occurs when a picosecond laser delivers an extremely fast, high-energy pulse that focuses into a tiny point beneath the skin. This creates a microscopic plasma bubble that gently disrupts pigment or tissue without burning the surface. Because it’s a non-thermal, highly precise effect, LIOB allows for effective collagen remodeling and pigmentation treatment with minimal downtime and high safety for all skin types.

Patients cannot receive treatments if they have experienced or is currently experiencing the following: women who are currently pregnant or breastfeeding, recent sun exposure or tanning, photosensitizing medications (like Accutane or certain antibiotics), history of keloids, photosensitive medical conditions (e.g, lupus, porphyria), uncontrolled medical issues related to skin healing, recent self-tan usage of strong-irritating products. When unsure, consult a doctor prior to treatment.

Our laser is designed to recognize only the pigment or structure we want to treat. It delivers energy in a precise wavelength and pulse that breaks up the spot without overheating the surrounding skin. This is achieved through a scientific principle called Selective Photothermolysis.

Most treatments can be repeated every 1–4 weeks, depending on the energy level and skin recovery. Gentle treatments have little to no downtime, while deeper resurfacing may require several weeks between sessions.

All of our devices include a 2-year warranty with no shot count limits, courtesy annual maintenance service checks, and lifetime customer support from our U.S. service centers.  Our dedicated technical team is available for remote troubleshooting, and we can dispatch engineers on-site if required.

Our systems are designed to be safe for all Fitzpatrick skin types. Each device allows clinicians to adjust energy levels and treatment parameters based on individual skin characteristics, ensuring safe, effective, and comfortable results across all skin tones.

Our technologies are designed to deliver long-lasting results, but no aesthetic treatment is completely permanent. Factors such as aging, lifestyle, and sun exposure can affect the longevity of results. With proper maintenance and care, patients can enjoy significantly improved and longer-lasting outcomes.

We have advanced devices, the technical team, the skilled workers, the expert QC team, the production could match your high demand, not only the quality, but also the delivery time. We always with the most strict and careful manner for every Quality Control procedure, to ensure consistent high quality of our products.

Apolomed has a strong distribution and channel network in more than 80 countries. We have been distinguished ourselves with state of the art products and established a reputable footprint in the worldwide market. In 2014, September 15, Apolomed had market milestone to be a listed company on Shanghai Stock Exchange Center. We commit to contirnuously strive for being the best manufacturer and to provide the best value to our customers.

We,Apolomed manufacture equipment srtictly in accordance with ISO 13485 and all our products comply with Medical CE certificates under the Council Directive 93/42/EEC(MDD) and regulations (EU) 2017/745(MDR). Our high end products had obtained certificates of US 510K, Australia TGA, Brazil Anvisa. All the above certificates warrant our Channel Partners to stay relevant in the Global Medical & Aesthetic industries.

To ensure all our products are truly world class, safe & effective, all Apolomed products are designed and manufactured strictly in accordance with ISO13485 and are certified by CE in Europe, FDA in USA, TGA in Australia, and Anvisa in Brazil, etc.. All the above certificates keeps our channel partners to stay relevant in the Global Medical & Aesthetic market.

Once consumers’ exercise frequency decreases or dietary restrictions are relaxed, consumers tend to spend less overtime. This is a lot cheaper than medications such as Ozempic.

Safe and painless beauty. No one can refuse beauty, and likewise, people should not refuse the way science becomes beautiful. With this type of laser device, consumers can achieve painless beauty and body sculpting in a short period.

Many consumers have the experience of losing weight. Short-term high-intensity exercise and strict diet control can indeed lead to weight loss. However, once consumers’ exercise frequency decreases or dietary restrictions are relaxed, consumers tend to gain weight in a short period. However, with this type of laser device, consumers can avoid the pain of losing weight and directly control their bodies.

Whether it is a professional beauty salon or a private medical institution, high-quality laser products can better meet the needs of buyers. Moreover, consumers can also personalize the specific device appearance.

While powerful, selective photothermolysis requires proper training and device selection. Selective photothermolysis is the foundation of modern laser aesthetics, empowering medspas to deliver precise, safe, and effective treatments for hair removal, pigmentation, vascular concerns, skin rejuvenation, and more

works by matching the wavelength, pulse duration, and energy level of a device to the specific target being treated

Darker skin types require appropriate wavelengths and cooling (e.g., 1064nm Nd:YAG). Consult the documentation for more information.

When calibrated properly, these factors allow clinicians to target deeper structures like hair follicles and vascular lesions—or more superficial pigment—while preserving epidermal integrity.

You often notice initial improvements within a few days. Full results develop over several weeks as your skin heals and regenerates. The timeline depends on the condition treated and your individual response.

Yes, you can use it on all skin types. Always check the settings and start with a test spot for safety.

You can treat many skin issues with one device. This device removes tattoos, reduces spots, and improves skin tone.